Link — failover
Variant: Failover
The primary parts and traffic moves to a standby you could already see. The break is one frame: the line turns rust and the packets on it vanish with no fade, because a failure is an instant and a 200ms tween would read as a warning building. Each half then recoils to its own node on a 192ms overshooting curve — the one place in the family that earns a bounce, since a line under tension that snaps does not stop where it broke. Once the recoil settles, 256ms of nothing, which is detection: the health check has to miss before anything reroutes, and leaving the gap visible is what makes this a failover and not a redraw. The dashed standby path promotes in 512ms ease-in-out — it was already on screen, so it is drawn over, not introduced — and traffic resumes along it, labelled active. Use it for redundancy diagrams, multi-region status and any "we switched over" notice.
The source
A complete HTML document. Paste it into an empty .html file and it plays — no stylesheet, script, font, or image to fetch.
<!doctype html>
<html lang="en">
<head>
<meta charset="utf-8" />
<meta name="viewport" content="width=device-width, initial-scale=1" />
<title>Link — failover</title>
<style>
:root {
/* Neutrals — fixed, never remixed. */
--ivory: #faf9f5;
--paper: #ffffff;
--oat: #e3dacc;
--slate: #141413;
/* Knobs — the remix API. A knob exists iff declared here and used below. */
--hue: 38.8;
--lift: 0;
--chroma: 1;
--speed: 1;
/* Accents — derived from the knobs with the family's offsets baked in,
so one hue roll moves them together. Defaults reproduce the original hex. */
--clay: oklch(calc(0.6724 + var(--lift)) calc(0.1308 * var(--chroma)) var(--hue));
--clay-d: oklch(calc(0.5797 + var(--lift)) calc(0.127 * var(--chroma)) var(--hue));
--olive: oklch(
calc(0.6118 + var(--lift)) calc(0.0713 * var(--chroma)) calc(var(--hue) + 88.3)
);
--rust: oklch(
calc(0.5408 + var(--lift)) calc(0.1357 * var(--chroma)) calc(var(--hue) - 10.3)
);
--_muted: color-mix(in srgb, var(--slate) 52%, transparent);
--_rule: color-mix(in srgb, var(--slate) 30%, transparent);
/* Clock — 6.4s: 1.9s of traffic on the primary, a 192ms snap, 256ms of
detection, a 512ms promotion of the standby, then over two and a
half seconds of traffic on the new path before the reset. */
--cycle: 6.4s;
--t: calc(var(--cycle) / var(--speed));
--_flow: calc(0.24s / var(--speed));
--ease-out: cubic-bezier(0.23, 1, 0.32, 1);
--ease-in-out: cubic-bezier(0.77, 0, 0.175, 1);
/* The recoil. A cable under tension that parts does not stop where it
broke; each end overshoots toward its anchor and settles. */
--ease-accent: cubic-bezier(0.34, 1.56, 0.64, 1);
}
* {
box-sizing: border-box;
margin: 0;
padding: 0;
}
body {
min-height: 100vh;
display: grid;
place-items: center;
background: var(--ivory);
font-family:
system-ui,
-apple-system,
'Segoe UI',
Roboto,
sans-serif;
color: var(--slate);
}
.link {
width: min(280px, 86vw);
height: auto;
display: block;
}
/* Each half is owned by its node, so when the link parts both ends
recoil home rather than one side vanishing. */
.half {
fill: none;
stroke-width: 3;
stroke-linecap: butt;
stroke-dasharray: 100 200;
animation: snap var(--t) infinite;
}
.packets {
fill: none;
stroke: var(--slate);
stroke-width: 6;
stroke-linecap: round;
stroke-dasharray: 0 25;
}
.on-primary {
animation:
flow var(--_flow) linear infinite,
primary-traffic var(--t) infinite;
}
.on-backup {
animation:
flow var(--_flow) linear infinite,
backup-traffic var(--t) infinite;
}
.break {
fill: none;
stroke: var(--rust);
stroke-width: 2.5;
stroke-linecap: round;
transform-box: fill-box;
transform-origin: center;
animation: break var(--t) infinite;
}
/* The standby is drawn in full the whole time — dashed, the family's
word for a path that exists but carries nothing — so the failover is
a promotion of something you could already see, not a new route. */
.standby {
fill: none;
stroke: var(--_rule);
stroke-width: 2.5;
stroke-dasharray: 8 6;
}
.promoted {
fill: none;
stroke: var(--olive);
stroke-width: 3;
stroke-linecap: butt;
stroke-dasharray: 100 200;
animation: promote var(--t) infinite;
}
.node {
fill: var(--paper);
stroke: var(--slate);
stroke-width: 2;
}
.label {
font-family: inherit;
font-size: 12px;
font-weight: 600;
letter-spacing: 0.14em;
}
.quiet {
fill: var(--_muted);
}
.primary-up {
animation: before var(--t) infinite;
}
.primary-down {
fill: var(--rust);
animation: after var(--t) infinite;
}
.backup-idle {
animation: before-late var(--t) infinite;
}
.backup-live {
fill: var(--olive);
animation: after-late var(--t) infinite;
}
@keyframes flow {
to {
stroke-dashoffset: -25;
}
}
/* The colour flips on the break frame itself — no fade — because the
failure is an instant, and a 200ms tween to rust would read as a
warning building up rather than a link that has already gone. */
@keyframes snap {
0%,
29.9% {
stroke: var(--olive);
stroke-dashoffset: 0;
opacity: 1;
}
30% {
stroke: var(--rust);
stroke-dashoffset: 0;
opacity: 1;
animation-timing-function: var(--ease-accent);
}
33% {
stroke: var(--rust);
stroke-dashoffset: 72;
opacity: 1;
}
36% {
stroke: var(--rust);
stroke-dashoffset: 72;
opacity: 1;
animation-timing-function: var(--ease-out);
}
44%,
88% {
stroke: var(--rust);
stroke-dashoffset: 72;
opacity: 0.4;
animation-timing-function: var(--ease-out);
}
93% {
stroke: var(--rust);
stroke-dashoffset: 72;
opacity: 0;
}
94% {
stroke: var(--olive);
stroke-dashoffset: 0;
opacity: 0;
animation-timing-function: var(--ease-out);
}
100% {
stroke: var(--olive);
stroke-dashoffset: 0;
opacity: 1;
}
}
/* Packets in flight on the primary are lost with it — gone on the break
frame, not faded, for the same reason the colour does not tween. */
@keyframes primary-traffic {
0%,
29.9% {
opacity: 1;
}
30%,
94% {
opacity: 0;
animation-timing-function: var(--ease-out);
}
100% {
opacity: 1;
}
}
@keyframes break {
0%,
30% {
opacity: 0;
transform: scale(0.9);
animation-timing-function: var(--ease-out);
}
33%,
36% {
opacity: 1;
transform: scale(1);
animation-timing-function: var(--ease-out);
}
44%,
88% {
opacity: 0.6;
transform: scale(1);
animation-timing-function: var(--ease-out);
}
93%,
100% {
opacity: 0;
transform: scale(1);
}
}
/* 256ms of nothing between the recoil settling and the promotion is
detection — the health check has to miss before anything reroutes,
and showing that gap is what makes this a failover, not a redraw. */
@keyframes promote {
0%,
37% {
stroke-dashoffset: 100;
opacity: 1;
animation-timing-function: var(--ease-in-out);
}
45%,
88% {
stroke-dashoffset: 0;
opacity: 1;
animation-timing-function: var(--ease-out);
}
93% {
stroke-dashoffset: 0;
opacity: 0;
}
94%,
100% {
stroke-dashoffset: 100;
opacity: 0;
}
}
@keyframes backup-traffic {
0%,
45% {
opacity: 0;
animation-timing-function: var(--ease-out);
}
48%,
88% {
opacity: 1;
animation-timing-function: var(--ease-out);
}
93%,
100% {
opacity: 0;
}
}
@keyframes before {
0%,
29.9% {
opacity: 1;
}
30%,
91% {
opacity: 0;
}
94%,
100% {
opacity: 1;
}
}
@keyframes after {
0%,
29.9% {
opacity: 0;
}
30%,
88% {
opacity: 1;
}
91%,
100% {
opacity: 0;
}
}
/* Paired labels share a centre but are different widths, so each pair
hands over in sequence — the old word leaves, then the new arrives. */
@keyframes before-late {
0%,
43% {
opacity: 1;
}
44.5%,
91% {
opacity: 0;
}
94%,
100% {
opacity: 1;
}
}
@keyframes after-late {
0%,
44.5% {
opacity: 0;
}
46%,
88% {
opacity: 1;
}
91%,
100% {
opacity: 0;
}
}
@media (prefers-reduced-motion: reduce) {
/* The recoil is pure movement; the halves cut back without the
overshoot. Everything else is state and stays, at 2x. */
.half {
--ease-accent: var(--ease-out);
}
.half,
.break,
.promoted,
.primary-up,
.primary-down,
.backup-idle,
.backup-live {
animation-duration: calc(var(--t) * 2);
}
.on-primary,
.on-backup {
animation-duration: calc(var(--_flow) * 2), calc(var(--t) * 2);
}
}
</style>
</head>
<body>
<svg
class="link"
viewBox="0 0 280 156"
role="img"
aria-label="Packets flow over a solid primary link while a dashed standby path waits beneath it. The primary snaps: both ends recoil to their nodes in rust and the traffic on it is lost. After a short pause the standby path draws solid and traffic resumes along it, labelled active."
>
<text class="label quiet primary-up" x="140" y="32" text-anchor="middle">PRIMARY</text>
<text class="label primary-down" x="140" y="32" text-anchor="middle">PRIMARY DOWN</text>
<path class="standby" d="M 46 62 C 80 136, 200 136, 234 62" />
<path class="promoted" pathLength="100" d="M 46 62 C 80 136, 200 136, 234 62" />
<path class="packets on-backup" d="M 40 52 L 46 62 C 80 136, 200 136, 234 62 L 240 52" />
<path class="half" pathLength="100" d="M 52 52 H 140" />
<path class="half" pathLength="100" d="M 228 52 H 140" />
<path class="packets on-primary" d="M 40 52 H 240" />
<path class="break" d="M 135 47 L 145 57 M 145 47 L 135 57" />
<circle class="node" cx="40" cy="52" r="12" />
<circle class="node" cx="240" cy="52" r="12" />
<text class="label quiet backup-idle" x="140" y="146" text-anchor="middle">STANDBY</text>
<text class="label backup-live" x="140" y="146" text-anchor="middle">ACTIVE</text>
</svg>
</body>
</html>
The variant family
Same idea, one axis moved. Compare them side by side before you commit.