Still life — breath
Variant: Breath
Breath on an idle figure, done as a change in size rather than a bob: the outline grows 2.4% upward and 2% outward from the feet, so the bird stays planted on its perch — translate it and it is floating, not filling. The belly patch swells three times as much as the outline, and that difference is what the eye reads as breath; scale everything alike and the figure is only zooming. The rhythm is uneven on purpose. In takes 1.5s on a sine, because it is muscle working at an even effort; out takes 2.3s on a gentle decay, quickest at the top because the lungs are recoiling, but not the library's hard ease-out, which would empty the figure in half a second and leave the rest of the exhale looking like a pause. Then 0.6s of nothing at the bottom — the rest a pumped loop leaves out. Reach for it on empty-state mascots, onboarding characters and illustrated waiting screens, where a figure should look calm without asking to be watched. Under reduced motion only the belly keeps a small, slower swell.
The source
A complete HTML document. Paste it into an empty .html file and it plays — no stylesheet, script, font, or image to fetch.
<!doctype html>
<html lang="en">
<head>
<meta charset="utf-8" />
<meta name="viewport" content="width=device-width, initial-scale=1" />
<title>Still life — breath</title>
<style>
:root {
/* Neutrals — fixed, never remixed. */
--ivory: #faf9f5;
--paper: #ffffff;
--oat: #e3dacc;
--slate: #141413;
/* Knobs — the remix API. A knob exists iff declared here and used below. */
--hue: 38.8;
--lift: 0;
--chroma: 1;
--speed: 1;
/* Accents — derived from the knobs with the family's offsets baked in,
so one hue roll moves them together. Defaults reproduce the original hex. */
--clay: oklch(calc(0.6724 + var(--lift)) calc(0.1308 * var(--chroma)) var(--hue));
--clay-d: oklch(calc(0.5797 + var(--lift)) calc(0.127 * var(--chroma)) var(--hue));
--olive: oklch(
calc(0.6118 + var(--lift)) calc(0.0713 * var(--chroma)) calc(var(--hue) + 88.3)
);
--rust: oklch(
calc(0.5408 + var(--lift)) calc(0.1357 * var(--chroma)) calc(var(--hue) - 10.3)
);
/* Clock — one breath: in 1.5s, out 2.3s, empty for 0.6s. Out runs longer
than in, and the rest at the bottom is the part loops leave out: a
figure that turns straight round from exhale to inhale is being pumped,
not breathing. */
--cycle: 4.4s;
--t: calc(var(--cycle) / var(--speed));
/* Inhale is a sine, because it is muscle pulling at an even effort. */
--ease-accent: cubic-bezier(0.37, 0, 0.63, 1);
/* The exhale is a gentle decay — lungs recoil, so it is quickest at
the top — but not the library's ease-out, which empties the figure in
half a second and leaves the rest of the 2.3s looking like a pause. */
--_ease-exhale: cubic-bezier(0.33, 0.7, 0.5, 1);
}
* {
box-sizing: border-box;
margin: 0;
padding: 0;
}
body {
min-height: 100vh;
display: grid;
place-items: center;
background: var(--ivory);
font-family:
system-ui,
-apple-system,
'Segoe UI',
Roboto,
sans-serif;
color: var(--slate);
}
figure {
display: grid;
justify-items: center;
gap: clamp(6px, 2vh, 12px);
}
/* Sized off the frame's height as well as its width: the card is short and
the caption has to fit under the figure at every stage. */
svg {
display: block;
width: min(260px, 84vw, calc((100vh - 76px) * 1.4));
height: auto;
overflow: visible;
}
.perch {
fill: none;
stroke: color-mix(in oklch, var(--oat), var(--slate) 26%);
stroke-width: 4;
stroke-linecap: round;
}
.twig {
stroke-width: 2.6;
}
.tail,
.beak,
.wing {
fill: var(--clay-d);
}
.body {
fill: var(--clay);
}
.belly {
fill: color-mix(in oklch, var(--clay) 34%, var(--ivory));
}
.foot,
.lid {
fill: none;
stroke: var(--clay-d);
stroke-width: 2;
stroke-linecap: round;
stroke-linejoin: round;
}
.lid {
stroke-width: 2.4;
opacity: 0;
}
.white {
fill: var(--paper);
}
.pupil {
fill: var(--slate);
}
/* Every pivot is a point on the drawing rather than a box's centre: the
body grows and leans from its feet, the face counter-turns about them
too, the tail swings from where it meets the body, and the eyes close
about their own centre line. */
.fig,
.ride,
.breath,
.head {
transform-origin: 100px 125px;
}
.belly {
transform-origin: 100px 121px;
}
.tail {
transform-origin: 100px 118px;
}
.eyes {
transform-origin: 100px 80px;
}
figcaption {
display: grid;
justify-items: center;
gap: 2px;
text-align: center;
}
.cue {
font-size: clamp(13px, 3.8vw, 15px);
font-weight: 600;
letter-spacing: -0.01em;
}
.spec {
font-size: clamp(11.5px, 3.2vw, 12.5px);
font-variant-numeric: tabular-nums;
color: color-mix(in oklch, var(--slate) 58%, var(--ivory));
}
/* Breath is a size change, never a bob. The outline grows 2.4% upward
from the feet and 2% outward, so the figure stays planted on the perch
— translate it instead and it is floating, not filling. */
.breath {
animation: inhale var(--t) infinite;
}
/* The belly patch swells three times as much as the outline. That
difference is what the eye reads as breath: if everything scales by the
same amount the figure is merely zooming. */
.belly {
animation: fill var(--t) infinite;
}
@keyframes inhale {
0% {
scale: 1 1;
animation-timing-function: var(--ease-accent);
}
34.091% {
scale: 1.02 1.024;
animation-timing-function: var(--_ease-exhale);
}
86.364% {
scale: 1 1;
}
100% {
scale: 1 1;
}
}
@keyframes fill {
0% {
scale: 1;
animation-timing-function: var(--ease-accent);
}
34.091% {
scale: 1.07;
animation-timing-function: var(--_ease-exhale);
}
86.364% {
scale: 1;
}
100% {
scale: 1;
}
}
@media (prefers-reduced-motion: reduce) {
/* The outline parks; the belly keeps a third of its swell on a slower
clock, so the figure is still visibly not a picture. */
.breath {
animation: none;
}
.belly {
animation: fill-still calc(var(--t) * 1.5) var(--ease-accent) infinite alternate;
}
@keyframes fill-still {
from {
scale: 1;
}
to {
scale: 1.025;
}
}
}
</style>
</head>
<body>
<figure
role="img"
aria-label="A small round bird on a perch, breathing: its belly swells and its outline grows slightly from its feet, then rests"
>
<svg viewBox="30 46 140 104" aria-hidden="true">
<g class="ride"><path class="tail" d="M94 116 L90 140 L100 135.5 L110 140 L106 116 Z" /></g>
<path class="perch" d="M36 126 Q100 130 164 126" />
<path class="perch twig" d="M146 127 L154 119.5" />
<g class="fig">
<path
class="foot"
d="M94 121 V126.5 M106 121 V126.5 M90.5 128 Q93 124.5 96.5 127 M102.5 128 Q105 124.5 108.5 127"
/>
<g class="breath">
<ellipse class="body" cx="100" cy="91.5" rx="30" ry="33.5" />
<ellipse class="belly" cx="100" cy="110" rx="17" ry="11" />
<path
class="wing"
d="M72.5 88 Q67 106 85 121 Q76 104 72.5 88 Z M127.5 88 Q133 106 115 121 Q124 104 127.5 88 Z"
/>
<g class="head">
<path class="beak" d="M96 89 H104 L100 95.5 Z" />
<g class="eyes">
<circle class="white" cx="89" cy="80" r="8.5" />
<circle class="white" cx="111" cy="80" r="8.5" />
<g class="pupils">
<circle class="pupil" cx="89" cy="80" r="3.4" />
<circle class="pupil" cx="111" cy="80" r="3.4" />
</g>
</g>
<path class="lid" d="M80.5 80 Q89 81 97.5 80 M102.5 80 Q111 81 119.5 80" />
</g>
</g>
</g>
</svg>
<figcaption>
<span class="cue">Breath</span>
<span class="spec">in 1.5s · out 2.3s · rest 0.6s</span>
</figcaption>
</figure>
</body>
</html>
The variant family
Same idea, one axis moved. Compare them side by side before you commit.